sd05 document number: ds31594 rev. 5 - 2 1 of 4 www.diodes.com november 2012 ? diodes incorporated sd05 uni-directional surface mount tvs features ? 350 watts peak pulse power (tp = 8x20 s) ? iec 61000-4-2 (esd): air ? 15kv, contact ? 8kv ? iec 61000-4-2 (esd), hbm ? 30kv ? unidirectional configuration ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability mechanical data ? case: sod323 ? case material: molded plasti c, ?green? molding compound, note 3. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: matte tin finish annealed over alloy 42 leadframe (lead free plating) solderable per mil-std-202, method 208 ? polarity: cathode band ? weight: 0.005 grams (approximate) ordering information (note 4) part number case packaging SD05-7 sod323 3000/tape & reel marking information thermal characteristics characteristic symbol value unit peak pulse power (tp = 8x20 s) (note 5) t a = +25c p p k 350 w thermal resistance, junction to ambient (note 5) t a = +25c r c/w operating and storage temperature range t j , t stg -55 to +150 c electrical characteristics (@t a = +25c, unless otherwise specified.) reverse standoff voltage breakdown voltage v br @ i t test current max. reverse leakage @ v rwm (note 6) max. clamping voltage @ i pp = 5a (note 7) max. clamping voltage v c @ i pp (note 7) total max capacitance c t v r = 0v f = 1mhz v rwm (v) min (v) max (v) i t (ma) i r ( a) v c (v) v c (v) i pp (a) (pf) 5 6.2 7.3 1.0 10 9.8 14.5 24 350 notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com for more in formation about diodes incorpor ated?s definitions of halogen- and antimony-free, "gree n" and lead-free. ? 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm br omine, <900ppm chlorine (<1500ppm t otal br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http://www.diodes.com. 5. device mounted on fr-4 pc board with suggested pad layout, which can be found on our website at http://www.diodes.com measur ed across pin 1 and pin 2. 6. short duration pulse test used to minimize self-heating effect. 7. clamping voltage value is based on an 8x20 s peak pulse current (i pp ) waveform. top view device schematic 12 1 = cathode 2 = anode za = product type marking code za sod323
sd05 document number: ds31594 rev. 5 - 2 2 of 4 www.diodes.com november 2012 ? diodes incorporated sd05 0 25 50 75 100 125 150 175 200 100 75 50 25 0 t , ambient temperature (c) fig. 1 pulse derating curve a p eak p u lse de r a t in g in % o f peak power or current 0 30 60 90 120 150 180 210 240 270 300 012 3 45 v , reverse voltage (v) fig. typical total capacitance vs. reverse voltage r 2 c , t o t al c a p a c i t a n c e (pf) t f = 1mhz 0 t, time ( s) fig. 3 pulse waveform 20 40 60 100 50 0 i , peak pulse current (%i ) ppp p 0.1 1.0 10 100 1,000 0.01 1.0 10 p , p eak p u lse p o we r (kw) pk 100 0.1 t , pulse width (s) fig. 4 pulse rating curve p 1 10 110100 number of cycles fig. 5 maximum non-repetitive surge current i, p eak f o r wa r d s u r g e c u r r en t (a) fsm t = 25c a pulse width 8.3ms single half-sine-wave
sd05 document number: ds31594 rev. 5 - 2 3 of 4 www.diodes.com november 2012 ? diodes incorporated sd05 package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. sod323 dim min max a 0.25 0.35 b 1.20 1.40 c 2.30 2.70 h 1.60 1.80 j 0.00 0.10 k 1.0 1.1 l 0.20 0.40 m 0.10 0.15 0 8 all dimensions in mm dimensions value (in mm) g 1.520 x 0.590 x1 2.700 y 0.450 k l m j c h b a y x x1 g
sd05 document number: ds31594 rev. 5 - 2 4 of 4 www.diodes.com november 2012 ? diodes incorporated sd05 important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com
|
